Wheel proximity sensor suitable for JCB 3CX 4CX
GX-AFTER

Wheel proximity sensor suitable for JCB 3CX 4CX

Catalog number:SKX990493A Nr OEM:701/60075 Manufacturer:GX-AFTER
Add a review

WHEEL STEERING PROXIMITY SENSOR SUITABLE FOR JCB 3CX, 4CX - 701/60075

Technical Specification and Compatibility

An inductive proximity sensor, a key component of the wheel steering control system (2WS/4WS). Its function is to precisely detect a metal tab on the steering knuckle, which informs the control module that the wheels have reached the "straight ahead" position. This is essential for correctly switching between steering modes and for the automatic centering of the rear axle.

Part number: 701/60075
Alternative part numbers: 701/80227, 701/42100
Sensor type: Inductive Proximity

A NEXGEN brand product – a high-quality replacement that meets the highest standards of durability and performance.

Application in machines

Brand (Machine Type) Model
JCB (Backhoe Loaders) 3CX, 4CX (models with three steering modes)
JCB (Telehandlers) Loadall (wide range of models, e.g., 520, 525, 526, 528, 530, 533, 535, 540)

The list above is for reference. We recommend visually comparing the sensor with your old part before purchasing.

Service Recommendation: Ensure Maximum Lifespan

Problems with sensors often stem from moisture and corrosion on the contacts. Before connecting the new part, thoroughly inspect and clean the plug in the machine's wiring harness. Use a dedicated HYPTRON electrical contact cleaner spray to ensure a perfect connection and avoid reading errors.

Part's Role in the Machine and Failure Diagnostics

The proximity sensor informs the control module when the steering axle wheels are in the straight position. This is critical information that allows the system to safely switch between steering modes (e.g., from road mode to 4-wheel steer). A failure of this sensor paralyzes the entire system and limits the machine's maneuverability.

Replace the sensor if your machine has steering problems. Common symptoms include:

  • Inability to change steering mode and an illuminated fault light.
  • The rear wheels do not center automatically after switching to road mode (2WS).
  • The system gets stuck in limp mode (front-wheel steer only).
  • Visible mechanical damage to the sensor, its cable, or plug.

Peace of Mind Guarantee: Why Choose Our Offer?

✓ Restore Full Maneuverability: Trust NEXGEN Reliability

In the construction industry, machine reliability is key to success. The NEXGEN sensor is a high-quality replacement that meets the highest standards of durability and performance. Thanks to its precise construction, it restores proper communication with the control module, which is crucial for regaining full maneuverability and work safety.

Is your machine stuck in one steering mode? Don't waste time fighting your machine!

Our sensor is available off-the-shelf. Order now and restore the agility that speeds up every job!

Expert's Guide: Key Installation Tips

  1. Set the correct air gap: It is crucial for proper operation to set the correct distance between the sensor face and the metal tab on the steering knuckle (usually 1-3 mm).
  2. Check the actuator tab: Make sure the metal plate that the sensor "sees" is clean, undamaged, and not bent.
  3. Clean the electrical connector: Before plugging in the new sensor, thoroughly clean the plug in the machine's wiring harness to ensure a reliable contact.
  4. Secure the cable: After installation, ensure the sensor cable is properly routed and secured to prevent it from chafing or being torn.

Frequently Asked Questions (FAQ)

1. The problem persists after replacing the sensor. What could be the cause?

If the new sensor does not solve the problem, you should check other components of the system: the steering mode switch in the cabin, the control module (ECU), the solenoid valve coils on the axle, and the continuity of the electrical harness.

2. Does this sensor require calibration?

No, it does not require electronic calibration. The key is to correctly set its physical distance from the metal tab on the steering knuckle.

Key Advantages

🛡️

Full Maneuverability

Restores all wheel steering modes.

🎯

Work Safety

Ensures correct wheel alignment.

📦

Quick Repair

A simple replacement gets you back to work fast.

Question mark

Have doubts or need confirmation to avoid costly downtime? Call us. Our experts will help you choose the right part to get your equipment back to work as soon as possible.

SKX990493A
701/60075
0.12 kg

Data sheet

SUITABLE FOR
JCB
MACHINE TYPE
BACKHOE LOADER
TELESCOPIC HANDLER
OEM NUMBERS
701/60075 / 701/80227 / 701/42100

Specific References

MPN
701/60075
Łączna ocena:
0,0
Kupiłeś ten produkt? Napisz recenzję dla innych!
Be the first to write your review !
Opinion:
(0 opinions)

Write a review

Wheel proximity sensor suitable for JCB 3CX 4CX

Catalog number: SKX990493A
Title for your review*
Your review*
Your name*
Your email*

Manufacturer

  • Serwis Kop Sp. z o.o. Sp. K.
  • Podkarpacka 57a
  • 35-082 Rzeszów
  • Poland
  • [email protected]
  • +48178643100

Responsible person

  • Serwis Kop Sp. z o.o. Sp. K.
  • Podkarpacka 57A
  • 35-082 Rzeszów
  • Poland
  • [email protected]
  • +48178643100
gross price

159.29 zł

net price
129,50 zł
Available in large quantity Temporarily unavailable
129,50 zł
net price

159.29 zł

gross price
Nie możesz dodać więcej produktów
  • You will receive 13 points, it gives you 5.20 zł
  • Lowest price from 30 days before the discount: 159.29 zł
    PRODUCT SPECIFICATION
    SUITABLE FOR
    JCB
    MACHINE TYPE
    BACKHOE LOADER
    TELESCOPIC HANDLER
    OEM NUMBERS
    701/60075 / 701/80227 / 701/42100

    See also similar products

    Wheel proximity sensor suitable for JCB 3CX SUPER 4CX, Chargers
    KAT: SKX990497A

    Wheel proximity sensor suitable for JCB 3CX SUPER 4CX, Chargers

    Temporarily unavailable
    Price Gross price 95.33 zł
  • You will receive 8 points, it gives you 3.20 zł
    Switch proximity shovel reset suitable for JCB 3CX 4CX
    KAT: 701/80345A

    Switch proximity shovel reset suitable for JCB 3CX 4CX

    Available in large quantity Temporarily unavailable
    Price Gross price 162.98 zł
  • You will receive 13 points, it gives you 5.20 zł
  • Nie możesz dodać więcej produktów
    Proximity sensor suitable for JCB 525, 537 telehandlers
    KAT: 701/60076A

    Proximity sensor suitable for JCB 525, 537 telehandlers

    Available in large quantity Temporarily unavailable
    Price Gross price 135.30 zł
  • You will receive 11 points, it gives you 4.40 zł
  • Nie możesz dodać więcej produktów

    WE OFFER PRODUCTS OF THE BEST BRANDS

    SERWIS KOP Sp. z o.o. Sp.k.
    ul. Podkarpacka 57A, 35-082 Rzeszów
    NIP: 813-352-97-49 REGON: 180286726

    Opening hours
    Telephone support - Monday - Friday (8:00 AM – 5:00 PM)
    Order pick-up - Monday - Friday (8:00 AM – 4:30 PM)

    Email



    Gadu-Gadu communicator
    GG: 4185846 - Daniel
    Phone
    +48 17 864 31 00
    +48 17 864 00 24
    +48 17 864 25 96

    Mobile phone
    +48 607-700-547
    +48 695-944-818
    +48 691-330-531
    +48 690-906-751

    Fax
    +48 17 864 31 20