A high-quality transmission oil pressure sensor. Its purpose is to accurately measure the oil pressure in the system and transmit this information to the gauge or the machine's control system. It is a key component of the early warning system against gearbox failure, protecting it from serious and costly damage caused by low oil pressure.
Aftermarket quality product – an intelligent choice combining excellent quality with an attractive price.
| Brand (Machine Type) | Model |
|---|---|
| JCB (Backhoe Loaders) | 1CX, 2CX, 3CX, 4CX |
| JCB (Wheel Loaders) | 406, 407, 408, 409 |
| JCB (Skid Steer Loaders) | ROBOT 190, 1110 |
| JCB (Tractors) | FASTRAC 125, 130, 145 |
| JCB (Other) | Telehandlers, Forklifts |
The list above is for reference. We recommend visually checking the connector and thread on your machine before purchasing.
Replacing the sensor is a perfect opportunity to check the condition and level of the transmission oil. If it is old or contaminated, replace it with new, high-quality HYPTRON oil, which will provide optimal lubrication and protect the gearbox.
The oil pressure sensor is a key component of the transmission protection system. Its failure can lead to a lack of information about low pressure, which can result in clutch seizure, damage to the oil pump, and consequently a very expensive overhaul of the entire gearbox.
Replace the sensor if:
A faulty sensor risks gearbox seizure.
The cost of replacing a sensor is negligible compared to a transmission overhaul. Protect your machine from the worst-case scenario – order a new GX-AFTER sensor today and be sure you will always know about an oil pressure problem in time.
That's one of the possible causes. Before replacing the sensor, check the transmission oil level and the condition of the oil filter. If both are fine and the light is still on, the next steps are to check the oil pressure with a gauge and inspect the sensor's electrical circuit.
2. What is the difference between a transmission oil pressure sensor and an engine oil pressure sensor?Although they both measure pressure, they are completely different parts. They differ in their pressure range, thread type, and connector. You should always use the sensor dedicated to the specific system to ensure correct readings and avoid damage.
3. How can I test if my old sensor is faulty?The easiest test is to swap it with a new, working sensor. You can also use a multimeter to check if the sensor correctly opens and closes the circuit. After disconnecting the wire and starting the engine, the light should not be on. After grounding the wire to the gearbox housing, the light should illuminate. If this happens, but it doesn't with the sensor connected, the sensor is faulty.
🛡️
Transmission Protection
Prevents seizure and costly failures.
🎯
Precise Reading
Gives confidence in the lubrication system's operation.
📦
Perfect Fit
Compatible with many JCB machine models.
Have doubts or need confirmation to avoid costly downtime? Call us. Our experts will help you choose the right part to get your equipment back to work as soon as possible.
Data sheet
Specific References
Manufacturer
Responsible person
See also similar products








Fits JCB 2CX 3CX 4CX, telehandlers, front loaders, ROBOT mini loaders and FASTRAC tractors

















