Steering beam bushing - 38 H - 30 OD X 25 ID
CORESPEX

Steering beam bushing - 38 H - 30 OD X 25 ID

Catalog number:SKX829883CX Nr OEM:808/00237 Manufacturer:CORESPEX
Add a review

BRONZE STEERING AXLE BUSH SUITABLE FOR JCB - 808/00237

Specification & Compatibility

Product: Steering Axle / Knuckle Bush
Producer: CORESPEX
Material: High-grade self-lubricating bronze
Dimensions: Outer Ø: 30 mm, Inner Ø: 25 mm, Height: 38 mm
Application (Older machine models):
JCB Backhoe Loaders

3CX, 4CX

Other JCB Machines

Wheeled Loaders, Telescopic Handlers, RTFL Forklifts

Part Number: 808/00237
Part Type: High-quality replacement

Essential for Installation

King Pins (recommended to replace as a set)
Knuckle Seals (crucial for protecting bushes and bearings)
HYPTRON High-Pressure Grease

What does this part do and what are the symptoms of wear?

The steering axle bush is a key component of the steering system, located in the steering knuckle. Its function is to provide a smooth, low-friction pivot point and to bear enormous loads. If you feel excessive play and "clunking" in the front wheels, knocking sounds when turning, and the machine's steering is imprecise, these are classic symptoms of a worn bush. Ignoring the problem leads to wear of the bores in the knuckle and axle beam, which is one of the most expensive repairs on a machine.

Parameters That Guarantee Reliability

🥉

High-Grade Bronze

Resistance to load and seizure

📏

Precise Dimensions

No play and a perfect fit

🛡️

Steering System Protection

Prevents expensive repairs

Why Choose a CORESPEX Bushing?

✔Precise Manufacturing

The accuracy and quality of materials guarantee long and trouble-free use without the need for frequent replacement.

✔Compatibility with Original Parts

The bushing is fully adapted to work with original pins and seals, ensuring a consistent repair.

✔Savings Without Compromise

The CORESPEX brand is a proven and safe alternative that offers quality comparable to original parts at a much better price.

Important Fitting / Service Tips

1.Always Replace as a Complete Axle Set

Knuckle bushes should always be replaced as a complete set on both wheels of one axle (upper and lower). This ensures proper geometry and even wear.

2.Absolutely Replace Pins and Seals

Installing new bushes on old, worn pins is pointless – the play will return immediately. Always replace bushes together with a new set of pins and seals.

3.Check the Bores in the Knuckle

Before installing new bushes, ensure that the bores in the steering knuckle are not oval. If necessary, they must be repaired (line-bored and fitted with oversized bushes).

4.Ensure Proper Lubrication

After installation, generously grease the joint through the nipples. Use high-quality grease, such as HYPTRON, and replenish it regularly according to the service intervals.

Frequently Asked Questions (FAQ)

Question: What are the first symptoms of wear of these bushes?

Answer: The first and easiest symptom to notice is play in the wheel, felt when moving it from side to side when the machine is raised.

Question: Can I replace only one bush?

Answer: This is highly not recommended. The bushes in a single knuckle (upper and lower) wear at a similar rate. Replacing only one will cause the old, worn bush to take more load, leading to rapid failure.

Question: What happens if I operate with a worn bush?

Answer: Operating with a loose bush causes wear to the bores in the steering knuckle and axle beam. Repairing these elements is one of the most expensive repairs on a machine, many times exceeding the cost of replacing pins and bushes in time.

Question mark

If you are unsure whether the selected product is suitable for your machine, contact us and we will help you choose the right part and provide practical advice in minutes.

SKX829883CX
808/00237
0.06 kg

Data sheet

SUITABLE FOR
JCB
MACHINE TYPE
BACKHOE LOADER
FORKLIFT
TELESCOPIC HANDLER
WHEELED LOADER
OEM NUMBERS
808/00237
OUTER DIAMETER (MM)
25
INNER DIAMETER (MM)
30
HEIGHT (MM)
38
BUSH WITH COLLAR
NO

Specific References

MPN
808/00237
Łączna ocena:
5,0
Kupiłeś ten produkt? Napisz recenzję dla innych!

2021-04-22

polecam

wszystko ok, zamówienie przyszło szybko, bez problemów ;) potrzebowałem znaleźć tuleje do starszego modelu jcb i się udało

Opinion:
(1 opinion)

Write a review

Steering beam bushing - 38 H - 30 OD X 25 ID

Catalog number: SKX829883CX
Title for your review*
Your review*
Your name*
Your email*

Manufacturer

  • Serwis Kop Sp. z o.o. Sp. K.
  • Podkarpacka 57A
  • 35-082 Rzeszów
  • Poland
  • [email protected]
  • +48178643100

Responsible person

  • Serwis Kop Sp. z o.o. Sp. K.
  • Podkarpacka 57A
  • 35-082 Rzeszów
  • Poland
  • [email protected]
  • +48178643100
gross price

17.22 zł

net price
14,00 zł
Available in large quantity Temporarily unavailable
14,00 zł
net price

17.22 zł

gross price
Nie możesz dodać więcej produktów
  • You will receive 1 points, it gives you 0.40 zł
  • Lowest price from 30 days before the discount: 17.22 zł
    PRODUCT SPECIFICATION
    SUITABLE FOR
    JCB
    MACHINE TYPE
    BACKHOE LOADER
    FORKLIFT
    TELESCOPIC HANDLER
    WHEELED LOADER
    OEM NUMBERS
    808/00237
    OUTER DIAMETER (MM)
    25
    INNER DIAMETER (MM)
    30
    HEIGHT (MM)
    38
    BUSH WITH COLLAR
    NO

    See also similar products

    Steering beam bushing suitable for JCB 3CX 4CX
    KAT: SKX829888CX

    Steering beam bushing suitable for JCB 3CX 4CX

    Available in large quantity Temporarily unavailable
    Price Gross price 19.25 zł
  • You will receive 2 points, it gives you 0.80 zł
  • Nie możesz dodać więcej produktów
    Sleeve - into a stabilizing bar, suitable for JCB 3CX 4CX
    KAT: SKX1006548A

    Sleeve - into a stabilizing bar, suitable for JCB 3CX 4CX

    Available in large quantity Temporarily unavailable
    Price Gross price 11.81 zł
  • You will receive 1 points, it gives you 0.40 zł
  • Nie możesz dodać więcej produktów
    Bush in steering cylinder suitable for JCB 2CX 3CX 4CX Telehandler
    KAT: SKX862618CX

    Bush in steering cylinder suitable for JCB 2CX 3CX 4CX Telehandler

    Available in large quantity Temporarily unavailable
    Price Gross price 14.76 zł
  • You will receive 1 points, it gives you 0.40 zł
  • Nie możesz dodać więcej produktów
    Pin seal - 25mm
    KAT: SKX943946A

    Pin seal - 25mm

    Available in large quantity Temporarily unavailable
    Price Gross price 2.45 zł
  • You will receive 1 points, it gives you 0.40 zł
  • Nie możesz dodać więcej produktów
    Swivel pin - stabilization bar suitable for JCB 3CX 4CX
    KAT: SKX973341A

    Swivel pin - stabilization bar suitable for JCB 3CX 4CX

    Available in large quantity Temporarily unavailable
    Price Gross price 17.84 zł
  • You will receive 1 points, it gives you 0.40 zł
  • Nie możesz dodać więcej produktów

    WE OFFER PRODUCTS OF THE BEST BRANDS

    SERWIS KOP Sp. z o.o. Sp.k.
    ul. Podkarpacka 57A, 35-082 Rzeszów
    NIP: 813-352-97-49 REGON: 180286726

    Opening hours
    Telephone support - Monday - Friday (8:00 AM – 5:00 PM)
    Order pick-up - Monday - Friday (8:00 AM – 4:30 PM)

    Email



    Gadu-Gadu communicator
    GG: 4185846 - Daniel
    Phone
    +48 17 864 31 00
    +48 17 864 00 24
    +48 17 864 25 96

    Mobile phone
    +48 607-700-547
    +48 695-944-818
    +48 691-330-531
    +48 690-906-751

    Fax
    +48 17 864 31 20