Wear pad 150 x 95 x 22mm suitable for JCB telehandlers
GX-AFTER

Wear pad 150 x 95 x 22mm suitable for JCB telehandlers

Catalog number:SKX975079A Nr OEM:160/00991 Manufacturer:GX-AFTER
Add a review

Telescopic Boom Slide Pad (150x95x22) suitable for JCB - 160/00991

Technical Specification and Compatibility

A high-quality 160/00991 teflon slide pad by NEXGEN, designed for the boom extension on JCB telehandlers (Loadalls). This is a critical wear pad that ensures a smooth and precise movement of the telescopic sections while protecting the metal components from friction. Precise dimensions (150x95x22 mm) and 80 mm hole spacing guarantee a perfect fit.

Part Number: 160/00991
Type: Boom Extension Slide Pad / Wear Pad
Length: 150 mm
Width: 95 mm
Thickness: 22 mm
Hole Spacing (C-C): 80 mm
Bolt Thread: 10x1.5

In the construction industry, machine reliability is the key to success. That's why we offer high-quality NEXGEN replacement parts for construction machinery, which meet the highest standards of durability and performance. Our products are the ideal solution for companies and specialists looking for reliable components at attractive prices.

Features of the 160/00991 Slide Pad

Low Friction: Teflon-like material ensures smooth, low-friction boom extension without jerking.
High Wear Resistance: Guarantees a long service life under heavy loads, protecting the more expensive metal boom sections.
Precise Dimensions: Exact 150x95x22 mm size and 80mm hole spacing ensure easy installation and eliminate boom slop.
Load Bearing: Transfers high pressure and load forces between boom sections when lifting.

Application in machinery

Brand Series Model and Year
JCB Telehandlers (Loadall) 535-125 HiViZ (USA), 535-140 HiViZ (USA) (2008-2012)
JCB Telehandlers (Loadall) 5.5-21 (555-210R) (2019-2022), 5.5-26 (555-260R) (2021-2022)
JCB Telehandlers (Loadall) 505-20 (2021-2022), 505-20TC (2017-2022), 506-23TC (2017-2022), 509-23TC (2017-2022), 509-45 TC (2018-2022), 510-42 (2017-2022), 510-44S TC (2017-2022), 510-55 TC (2017-2022)
JCB Telehandlers (Loadall) 520 (1997-1999), 520 LE (1999-2003), 520S (1997-1999), 520S LE (1999-2003), 520-55 (1993-1996), 520-55 FS (1993-1997)
JCB Telehandlers (Loadall) 525-60 (T4i/T5/AG/E) (2015-2022)
JCB Telehandlers (Loadall) 526 (1996-2008), 526 LE (2003-2005), 526S (1996-2005), 526-55 (1994-2003), 526-56 (2008-2020)
JCB Telehandlers (Loadall) 527-58 (1994-2022), 527-67 (1994-1997)
JCB Telehandlers (Loadall) 528-70 (1999-2008), 528S (2000-2008)
JCB Telehandlers (Loadall) 530, 530S, 530-70 (2016-2022), 530-110 (1989-2021), 530-120 (1989-1996), 530-67 (1994-1994), 530-95 (1990-1996)
JCB Telehandlers (Loadall) 531-70 (2005-2022)
JCB Telehandlers (Loadall) 532, 532H, 532LE, 532-60 (2019-2022), 532-70 (2019-2022)
JCB Telehandlers (Loadall) 533-105 (2002-2022)
JCB Telehandlers (Loadall) 535, 535-60 (2004-2005), 535-67 (1994-1997), 535-95 (2000-2022), 535-125 (2004-2022), 535-140 (2004-2019)
JCB Telehandlers (Loadall) 536-60 (2006-2022), 536-70 (2007-2021), 536-95 (2019-2022)
JCB Telehandlers (Loadall) 537, 537H, 537LE, 537-120 (1995-1996), 537-130 (1994-1996)
JCB Telehandlers (Loadall) 538-60 (2019-2022), 538-70 (2021-2022)
JCB Telehandlers (Loadall) 540, 540S, 540-70, 540-120, 540-140 (2004-2022), 540-170 (2001-2022), 540-180R (2016-2022), 540-200 (2012-2022), 540V140 (2014-2022)
JCB Telehandlers (Loadall) 541-70 (2005-2022), 542-70 (2019-2022)
JCB Telehandlers (Loadall) 550-140 (2008-2022), 550-170 (2012-2022), 550-80 (2011-2022), 560-80 (2014-2022)
JCB Wheel Loaders 409 TELE MASTER, 411, 412S, 414S, 416, 416S, 422ZX, 426, 426e, 427, 434S, 435S, 436, 436e, 437, 446, 455ZX, 456, 456E, 457, 467, TM200, TM270, TM300, TM310, TM-WASTEMASTER
JCB Military Products 436eM, 535-95, 540 NAVAL, 541-70M, HMRTF, LCRTF (TACOM)
JCB LIFTALL 1553, 1554, 1202, 1253

The list above is for reference. It is crucial to verify the dimensions (150x95x22 mm) and hole spacing (80 mm) on your machine.

Related Parts and Hardware

This pad is part of a set. For a full boom service, you will also need other slide pads (top, bottom, side) of various dimensions and an appropriate telescopic boom grease (e.g., spray). You will need M10x1.5 bolts for installation.

⚠️ Safety Warning

Operating with worn boom slide pads is dangerous. Excessive play between boom sections leads to "jerking" and "banging" of the boom, which can cause load instability and machine rollover. Furthermore, worn pads cause direct metal-on-metal contact, leading to irreversible damage to the boom sections.

Part Role in the Machine and Failure Diagnostics

The 160/00991 slide pad is a wear pad mounted on the ends of the boom sections. Its job is to provide a smooth, low-friction surface for one section to slide inside the other, without metal-on-metal contact. These pads bear immense loads and compression forces, especially when lifting heavy loads at full extension.

  • › Loud grinding or metal-on-metal scraping noise during boom extension/retraction.
  • › Jerky or "juddering" boom movement.
  • › Excessive play (rocking) in the extended boom sections.
  • › Visible cracking or complete wear (material is gone) of the slide pad.
  • › Plastic or metal shavings visible at the end of the boom sections.

📞 Can't find the part you're looking for?

No worries. Our website features only a few thousand of the over 60,000 parts we have in stock. Contact us – we likely have what you need readily available!

🔧 Expert Guide: Key Installation Tips

  1. Replace as a Set: Slide pads should always be replaced as a complete set (all top, bottom, and side pads) for a given section to ensure even load distribution.
  2. Clean Sections: Before installation, thoroughly clean the inside and outside of the boom sections of all dirt and old grease.
  3. Check Dimensions: Ensure the dimensions (150x95x22 mm) and hole spacing (80 mm) are correct.
  4. Lubrication: After installation, generously lubricate the new pads with a dedicated boom grease.
  5. Adjustment: After replacing the pads, the boom must be re-shimmed (adjusted) according to the service manual to set the correct clearances.

Frequently Asked Questions (FAQ)

What is the difference between this (160/00991) and 160/00982?

They differ in size. This slide pad (160/00991) has dimensions of 150 x 95 x 22 mm. The 160/00982 pad is thinner and narrower (150 x 75 x 14.5 mm). They are not interchangeable and fit different locations or models.

How do I measure the 80 mm hole spacing?

The 80 mm spacing is measured from the center of the first bolt hole to the center of the second bolt hole.

Do I have to replace all the pads at once?

Yes, this is highly recommended. The pads wear as a set. Replacing only one (the most worn) will cause uneven load distribution and rapid failure of the new pad.

Question mark

Do you have doubts or need confirmation to avoid costly downtime? Call us. Our experts will help you select the right part to get your equipment back to work as quickly as possible.

SKX975079A
160/00991
0.39 kg

Data sheet

SUITABLE FOR
JCB
MACHINE TYPE
TELESCOPIC HANDLER
OEM NUMBERS
160/00991
THICKNESS (MM)
22
22
LENGTH (MM)
150
150
WIDTH (MM)
95
95
BOLT SPACING
80

Specific References

MPN
160/00991
Łączna ocena:
0,0
Kupiłeś ten produkt? Napisz recenzję dla innych!
Be the first to write your review !
Opinion:
(0 opinions)

Write a review

Wear pad 150 x 95 x 22mm suitable for JCB telehandlers

Catalog number: SKX975079A
Title for your review*
Your review*
Your name*
Your email*

Manufacturer

  • Serwis Kop Sp. z o.o. Sp. K.
  • Podkarpacka 57a
  • 35-082 Rzeszów
  • Poland
  • [email protected]
  • +48178643100

Responsible person

  • Serwis Kop Sp. z o.o. Sp. K.
  • Podkarpacka 57A
  • 35-082 Rzeszów
  • Poland
  • [email protected]
  • +48178643100
gross price

36.90 zł

net price
30,00 zł
Available in large quantity Temporarily unavailable
30,00 zł
net price

36.90 zł

gross price
Nie możesz dodać więcej produktów
  • You will receive 3 points, it gives you 1.20 zł
  • Lowest price from 30 days before the discount: 36.90 zł
    PRODUCT SPECIFICATION
    SUITABLE FOR
    JCB
    MACHINE TYPE
    TELESCOPIC HANDLER
    OEM NUMBERS
    160/00991
    THICKNESS (MM)
    22
    22
    LENGTH (MM)
    150
    150
    WIDTH (MM)
    95
    95
    BOLT SPACING
    80

    See also similar products

    Wear pad suitable for JCB telehandlers - 150 x 75 x 14.25mm
    KAT: SKX1008505A

    Wear pad suitable for JCB telehandlers - 150 x 75 x 14.25mm

    Available in large quantity Temporarily unavailable
    Price Gross price 22.14 zł
  • You will receive 2 points, it gives you 0.80 zł
  • Nie możesz dodać więcej produktów

    WE OFFER PRODUCTS OF THE BEST BRANDS

    SERWIS KOP Sp. z o.o. Sp.k.
    ul. Podkarpacka 57A, 35-082 Rzeszów
    NIP: 813-352-97-49 REGON: 180286726

    Opening hours
    Telephone support - Monday - Friday (8:00 AM – 5:00 PM)
    Order pick-up - Monday - Friday (8:00 AM – 4:30 PM)

    Email



    Gadu-Gadu communicator
    GG: 4185846 - Daniel
    Phone
    +48 17 864 31 00
    +48 17 864 00 24
    +48 17 864 25 96

    Mobile phone
    +48 607-700-547
    +48 695-944-818
    +48 691-330-531
    +48 690-906-751

    Fax
    +48 17 864 31 20