2CX, MIDI CX
The spring bush is a key sliding component that ensures a tight pin fit and bears enormous loads in the bucket tipping link. Its split design allows for easier installation and a perfect fit. If you notice excessive play in the bucket, hear knocking sounds during loading and dumping, and the bucket tilt control is imprecise, these are classic symptoms of a worn bush. Ignoring the problem leads to wear of the bores in the link and ram, which is one of the most expensive repairs, requiring line boring.
💪
High Wear Resistance
Long life and attachment protection
🎯
Perfect Press Fit
Effective play reduction
📏
Precise Dimensions
Smooth and stable operation
The accuracy and quality of materials guarantee long and trouble-free use without the need for frequent replacement.
The bushing is fully adapted to work with original pins and seals, ensuring a consistent repair.
The GX-AFTER brand is a proven and safe alternative that offers quality comparable to original parts at a much better price.
Installing new bushes on an old, worn pin is pointless – the play will return immediately. Always replace bushes together with a new pin and seals.
Before installing new bushes, ensure that the bores are not oval. If necessary, they must be repaired (line-bored).
Press the bush in evenly using a press. Hitting it with a hammer can cause damage or improper seating.
After installation, generously grease the joint through the nipples. Use high-quality grease, such as HYPTRON, and replenish it regularly according to the service intervals.
Answer: The easiest way is to pry the bucket with a crowbar or another machine. Any noticeable play (knocking) on the tipping link pins indicates worn bushes and pins.
Question: Can I replace only one, most worn bush?Answer: It is highly not recommended. The bushes in a single joint wear at a similar rate. Replacing only one will cause the old, worn bush to take more load, leading to rapid failure.
Question: What happens if I operate with worn bushes?Answer: Operating with play on the attachment causes the bores in the link and ram to wear out. Repairing these elements is one of the most expensive repairs, many times exceeding the cost of replacing pins and bushes in time.
If you are unsure whether the selected product is suitable for your machine, contact us and we will help you choose the right part and provide practical advice in minutes.
Data sheet
Specific References
Manufacturer
Responsible person
See also similar products




Fits JCB 2CX

















