Excavator bucket with a width of 40 cm (400 mm) and part number B40MS01, manufactured by HIMACORE. It is a universal digging bucket, dedicated to micro-excavators and mini excavators in the weight range of 0.7 – 2.0 tons, equipped with the LEHNHOFF MS01 quick coupler system. The bucket is brand new, complete, and ready for immediate work on the construction site.
HIMACORE attachments with MS01 adapter are the ideal solution for micro-excavators. The lightweight yet durable construction does not overload the machine arm, allowing for efficient work in foundation and utility trenches.
The Lehnhoff coupler family is an industry standard. Below is a brief characteristic of each system to help select the right solution:
| Mounting System | Machine Class |
|---|---|
| Lehnhoff MS01 | Micro-excavators and mini excavators with an operating weight of approx. 0.7 to 2.0 tons (regardless of brand: JCB, Kubota, Yanmar, Takeuchi, CAT, Wacker Neuson etc., provided they have an MS01 coupler) |
Note: The MS01 system is significantly smaller than MS03. Ensure your machine has the correct quick coupler.
The bucket is supplied with teeth, but without loose pins (in the MS01 system, mounting shafts are an integral part of the adapter plate). To lock, a quick coupler key (hex or special) is needed.
Always check if the quick coupler mechanism has locked the bucket shafts correctly. Dirt in the sockets can prevent full closure, leading to the bucket falling off.
The 40 cm bucket is used for trenching and general excavation.
📞 Can't find the part you're looking for?
Do you have doubts or need confirmation to avoid costly downtime? Call us. Our experts will help you select the right part to get your equipment back to work as quickly as possible.
No. This bucket has an MS01 adapter, which is too small for the MS03 coupler. Attempting to attach it will be impossible due to the difference in spacing and shaft diameter.
Yes, 40cm (and 30cm) are the most commonly chosen widths for digging trenches for installations, providing a good compromise between capacity and trench width.
The MS01 system is the "de facto" standard for micro-excavators in many Western European countries. This allows rental companies to easily swap attachments between machines of different manufacturers (e.g., Bobcat, Kubota, Yanmar), as long as they have this coupler.
Do you have doubts or need confirmation to avoid costly downtime? Call us. Our experts will help you select the right part to get your equipment back to work as quickly as possible.
Data sheet
Specific References
Manufacturer
Responsible person
See also similar products






Used in machines with LEHNHOFF MS01 quick coupler

















