3CX, 4CX
The stabilizer foot is a crucial component that provides a stable base of support for the machine while operating the backhoe. Its job is to distribute the machine's weight over a large area to prevent it from sinking into soft ground. If your foot is cracked, severely bent, or its bottom is worn through, it's time for a replacement. Operating with a damaged foot is extremely dangerous – it risks the machine suddenly shifting, which could lead to it tipping over and causing a very serious accident.
Perform the replacement on a stable, level surface. Raise the machine on its bucket and the other outrigger to ensure safe access.
Before fitting the new foot, carefully check that the hole in the stabilizer leg is not worn or oval. Excessive play will accelerate wear on the new pin.
Installing a new foot on an old, worn pin is pointless. Always replace these components as a set to ensure a tight and safe connection.
To provide the machine with even support and avoid stress, always replace both feet (left and right) at the same time.
Answer: Yes, this is very likely. Cracked, bent, or worn-out feet do not provide stable support. You should also check for play in the stabilizer leg wear pads.
Question: Can I weld a cracked foot?Answer: It is highly not recommended. Welding cast iron is very difficult and rarely provides a durable repair, especially for a component that bears such enormous loads. A replacement is the only safe solution.
Question: Will this foot fit a machine built before VIN 462317?Answer: No. Older JCB models used a different type of foot and mounting. This product is exclusively for machines manufactured after serial number 462317.
💪
Durable Cast Steel
Maximum safety and load capacity
🚜
Maximum Stability
Reliable support in all conditions
🎯
Perfect Fit
Easy and fast installation
The accuracy and quality of materials guarantee long and trouble-free use without the need for frequent replacement.
The foot is fully adapted to work with original outrigger legs and pins, ensuring a consistent and safe repair.
The GX-AFTER brand is a proven and safe alternative that offers quality comparable to original parts at a much better price.
If you are unsure whether the selected product is suitable for your machine, contact us and we will help you choose the right part and provide practical advice in minutes.
Data sheet
Specific References
Manufacturer
Responsible person
See also similar products





Foot stabiliser suitable for JCB 3CX 4CX backhoe loaders above, VIN number 462317.

















