3CX SUPER, 4CX
The front fender is a key bodywork component that protects the cab, steering system, and radiators from water, mud, and stones thrown up by the wheels. If your fender is cracked, has missing pieces, broken mountings, or is deformed from an impact, it is time for a replacement. A faulty fender not only spoils the machine's appearance but, more importantly, it fails to protect key components from dirt and corrosion and also creates a road hazard from uncontrolled water spray.
Before fitting a new fender, thoroughly inspect the condition of the metal bracket. A cracked or bent bracket will prevent a solid installation and cause vibrations.
We recommend using new mounting bolts with rubber washers to ensure a secure fit and to dampen vibrations.
During installation, make sure the fender is aligned correctly and maintains a safe distance from the tire, including at full steering lock.
Replacing both front fenders (left and right) at the same time will give the machine a symmetrical, professional appearance.
Answer: The most common cause is a damaged or cracked metal bracket that the fender mounts to. You should also check the wheel balancing.
Question: Will this fender fit a standard 3CX with small front wheels?Answer: No. This model is exclusively for the 3CX SUPER and 4CX versions, which have four equal, large wheels. A standard 3CX requires a different, smaller fender.
Question: Can I repair a cracked fender?Answer: Repairing cracked plastic is difficult, not durable, and often not cost-effective. Replacing it with a new part is the fastest and most reliable way to restore full protection and aesthetics to the machine.
💪
Flexible and Durable Polymer
Resistant to job site conditions
🛡️
Effective Mud Protection
Cleaner machine, less corrosion
🎯
Perfect Fit
Factory look and easy installation
The accuracy and quality of materials guarantee long and trouble-free use without the need for frequent replacement.
A new fender is the cheapest way to protect much more expensive machine components from dirt, water, and corrosion.
Complete and undamaged bodywork shows care for the machine and increases its market value.
If you are unsure whether the selected product is suitable for your machine, contact us and we will help you choose the right part and provide practical advice in minutes.
Data sheet
Specific References
Manufacturer
Responsible person
See also similar products







Right front fender suitable for 3CX SUPER 4CX backhoe loaders

















