-
- About Us
- Cooperation
- News
- Offer
- E-shop
- Contact
- WYSZUKIWARKA GĄSIENIC
- WYSZUKIWARKA SZYB
- Kategorie produktowe
-
ALL CATEGORIES
-
-
-
-
-
-
SLEW SYSTEM
-
-
-
-
-
ARMS / SWING / STABILIZERS
-
-
-
ARMS / SWING / STABILIZERS
-
-
-
-
-
TRANSMISSION / AXLES / WHEELS
- TIE RODS
- KIT SPIDER FOR DRIVE SHAFTS
- DIFFERENTIAL
- HUB / GEAR REDUCTION
- SOLENOID VALVES / COILS
- FLANGES / COUPLING YOKES
- KIT SPIDERS
- BEARINGS
- BUSHES / WASHERS MOUNT AXLE
- AXLE / DIFFERENTIAL HOUSING
- DRIVESHAFTS / CENTER JOINTS
- BOLTS / NUTS / STRAPS
- LOCK / CIRCLIP / CLIP
- KNUCKLE
- CROWN WHEEL AND PINIONS
- SEALS
- OTHERS
-
-
-
TRANSMISSION / AXLES / WHEELS
-
-
-
-
-
STEERING / CONTROL
-
-
-
STEERING / CONTROL
-
-
-
-
-
-
HYDRAULICS
-
-
-
-
-
-
BRAKES
-
-
-
-
-
ELECTRICS
- BEACON FLASHING
- CAB
- CAB SWITCHES
- DRIVING/GEAR SHIFTING SWITCHES
- FRONT ROAD LIGHTING
- FUSES / FUSE BOXES
- GAUGES / TACHOMETERS
- HALOGEN / WORKING LIGHTS
- HARNESS
- HEATER / AIR FLOW SWITCHES
- IGNITION SWITCHES
- LENS
- LIGHT SWITCHES
- LIGHTING
- NUMBER PLATE LIGHT
- OTHERS
- PLUGS
- REAR ROAD LIGHTING
- RELAYS / FLASHERS
- SOCKETS
- WIPER SWITCHES
-
-
-
ELECTRICS
- ALTERNATOR COMPONENTS
- ALTERNATORS
- BATTERY ISOLATER SWITCH
- ENGINE
- FUEL/OIL LEVEL SENSORS
- HEATERS
- HEATERS / BLOWERS
- LEVELING SENSORS
- MODULES
- MOTOR STARTER COMPONENTS
- MOTOR STARTERS
- PRESSURE SENSORS
- PROXIMITY SENSORS / STEERING SENSORS
- REVERSE ALARM
- SOLENOIDS ENGINE STOP
- STOP / BRAKE SENSORS
- SWITCHES / SENSORS / MODULES
- TEMPERATURE SENSORS
- THERMOSTARTS
-
-
-
-
-
ENGINE
- BLOCK
- TIMING SEALS
- RADIATORS / WATER COOLERS
- FUEL FILTERS
- TIMING
- ROCKER COVERS
- TURBOCHARGERS
- FUEL LIFT PUMPS / WATER SEPARATORS
- BELT PULLEYS
- AIR FILTER HOUSING
- CYLINDER HEAD
- THERMOSTAT HOUSING
- INJECTION PUMPS
- FLYWHEELS / CROWN
- BELT TENSIONER / BELT PULLEYS
- EQUIPMENT
- THERMOSTATS
- CRANKCASE BREATHER VENT
- BELT
- COOLING SYSTEM
- WATER PUMPS
- CYLINDER HEAD GASKETS/SEALS
- FANS
- FUEL SYSTEM
- FUEL SEDIMENT BOWLS
- RINGS
- INTAKE / EXHAUST VALVES
- HOSES
- THERMOSTARTS
- PISTONS
- EXPANSION TANKS
- INJECTORS / NOZZLES
- SEALS
-
-
-
-
-
-
OILS / FLUIDS / LUBRICANTS / PAINTS
-
-
-
OILS / FLUIDS / LUBRICANTS / PAINTS
-
-
-
-
-
-
FILTERS
-
-
-
-
-
GLASS / CAB GLAZING
-
-
-
GLASS / CAB GLAZING
-
-
-
-
-
TEETH / ADAPTORS / PIN LOCKS
-
-
-
-
-
-
-
Rubber Tracks suitable for construction machines
High-quality NEXGEN rubber tracks, which we offer are suitable for excavators and mini-excavators JCB, CAT, Case, Komatsu, Volvo and New Holland. In our company quality is a factor which we particularly pay attention to, that's why each rubber tracks are made with the latest technologies of the most durable and natural material- rubber.
Natural rubber characterized by high density and increased weight for better quality. Rubber Tracks have 52% rubber, thanks to that resistance to cracking and abrasion is greater. Extra internal reinforced stainless steel cord increases track tension make’s that product is durable and reliable. Perfect guidance and movement of the track along the line is ensured by perfectly profiled internal spurs, thanks to which the rollers and idler and drive wheels smoothly move along the track, and the wide, additionally hardened steel links move the machine perfectly on the ground. Starting with the track tension, it is important to check it regularly, every 50/100 engine hours and keep it tight. You should definitely avoid moving the track on sharp, stone surfaces, long distances on asphalt or concrete (transport is recommended, e.g. by truck), sudden turns and turns at narrow angles and direct contact with the sun.
However, we recommend: making slow and wide turns of the machine (especially in sandy and rocky areas), washing with water and keeping the rubbertrack dry. Particular attention should be paid when working on narrow roads, when cutting trees and on construction sites with cracked sections. Rest assured that following all of these rules will make the replacement of our tracks a rare worry. To ensure the best and error-free selection of the caterpillar track for the construction machine, we advise you to measure it properly on the mounted machine, or to read the dimensions from an older model. The measure of the rubbertrack has (the order of the elements should be taken into account): width, link pitch - i.e. track pitch, number of links and possible letters, which are relatively numerous and each may have a different meaning. Example dimensions of the caterpillar should be as follows: 300x80x52. By calling our experts with a well-measured rubbertrack, the customer can be 100% sure that the matter will go quickly and smoothly. We know that "time is money", therefore we recommend and instruct our customers how to perform the appropriate measurement of the caterpillar, so as to correctly choose the right one that fits the machine. If, however, it is not possible, our traders will make every effort to select the appropriate part for a given machine using its VIN number.
Our warehouse is rich in caterpillars, thanks to which we are able to adapt it to virtually any construction machine, and thanks to fast and professional service, the satisfaction of our customers grows day by day. We cordially invite you to familiarize yourself with our offers, and to contact us - 172303300 or e-mail biuro@serwis-kop.pl.
Related posts





WE OFFER PRODUCTS OF THE BEST BRANDS


















ul. Podkarpacka 57A, 35-082 Rzeszow
Tax ID: 813-352-97-49 REGON: 180286726
Opening hours
Telephone support - Monday - Friday (08:00 - 17:00)
Order pick-up - Monday - Friday (08:00 - 16:30)
biuro@serwis-kop.pl
daniel@serwis-kop.pl
Gadu-Gadu communicator
GG: 4185846 - Daniel
+48 17 864 31 00
+48 17 864 00 24
+48 17 864 25 96
Mobile phone
+48 607-700-547
+48 695-944-818
+48 691-330-531
+48 690-906-751
Fax
+48 17 864 31 20