-
- About Us
- Cooperation
- News
- Offer
- E-shop
- Contact
- TRACK FINDER
- WYSZUKIWARKA SZYB
- Kategorie produktowe
-
ALL CATEGORIES
-
-
-
-
-
-
SLEW SYSTEM
-
-
-
-
-
AXLES
- TIE RODS
- KIT SPIDER FOR DRIVE SHAFTS
- DIFFERENTIAL
- MOUNT THE KNUCKLE
- KIT SPIDER FOR AXLE SHAFTS
- HUB / GEAR REDUCTION
- PROPSHAFTS
- SOLENOID VALVES / COILS
- FLANGES / COUPLING YOKES
- BEARINGS
- BUSHES / WASHERS MOUNT AXLE
- AXLE / DIFFERENTIAL HOUSING
- DRIVESHAFTS / CENTER JOINTS
- BOLTS / NUTS / STRAPS
- LOCK / CIRCLIP / CLIP
- CROWN WHEEL AND PINIONS
- SEALS
- OTHERS
-
-
-
-
-
-
-
-
ENGINE
-
-
-
-
-
COILS / SOLENOID VALVES
-
SWIVELS / TURNING JOINTS
-
PUMPS / STEERING VALVES / MOTORS
-
-
-
VALVES
-
HYDRAULIC HOSES / PIPES
-
RAMS
-
ACCUMULATORS
-
QUICKHITCHES
-
-
-
BOLTS / NUTS / WASHERS
-
PUMP DRIVESHAFTS
-
SEALS VALVES / PUMPS
-
OTHERS
-
-
-
-
-
-
-
TIMING
-
EQUIPMENT
-
-
LUBRICATION SYSTEM
-
-
INDUCTION / EXHAUST SYSTEM
-
SEALS / GASKET SETS
-
ENGINE MOUNTING
-
SERVICE TOOLS
-
-
-
-
-
-
STABILIZERS
-
-
-
-
-
-
FUSES / FUSE BOXES
-
RELAYS / FLASHERS
-
REVERSE ALARM
-
-
HEATERS / BLOWERS
-
BATTERY ISOLATER SWITCH
-
-
-
-
-
OILS
-
FLUIDS
-
-
-
PAINTS
-
-
-
-
-
-
-
GLASS / CAB GLAZING
-
-
-
RUBBER SEALS - GLASS
-
ASSEMBLY KITS / ADHESIVES
-
-
-
-
-
ADAPTERS
-
BOLTS / LOCKS
-
-
-
-
HYDRAULIC INSTALLATIONS
-
TOEPLATES
-
TOOTH RIPPER
-
-
-
HYDRAULIC HAMMERS / TOOLS
-
PLOWS
-
QUICKHITCHES
-
FORKS
-
-
-
EARTH DRILL / AUGER
-
SWEEPER / COMPONENTS
-
SWINGOTILT / PLATFORMS
-
-
-
-
-
ACCESSORIES
-
DECAL / STICKERS
-
-
-
GADGETS
-
CLOTHES
-
FAN ZONE
-
-
-
- SPARE PARTS SUITABLE FOR
- JCB
- CAT
- VOLVO
- KOMATSU
- CASE
- NEW HOLLAND
JCB Agricultural Attachments: A Complete Guide to Grabs, Forks, and Bale Handlers
JCB Agricultural Attachments: A Complete Guide to Grabs, Forks, and Bale Handlers
The Heart of the Modern Farm
Modern agriculture is a game of efficiency. Every minute of downtime, every inefficient operation, is a real loss. In this race, the JCB Agri telehandler or backhoe loader has become the true materials handling hub of the farm. However, a machine, even the most powerful one, is only as good as its attachment. JCB understands this perfectly, offering one of the broadest and most well-thought-out ranges of agricultural attachments on the market, designed to maximize productivity and work perfectly with the machine. In this complete guide, we will analyze the key tools that turn a yellow machine into an indispensable farmhand.
The Design Philosophy of JCB Agri Attachments
Before we dive into specific models, it's worth understanding what sets JCB's agricultural attachments apart. These are not just construction tools painted a different color. They are designed from the ground up with the specific needs of farming in mind:
- Optimized Geometry: Attachments are designed so the operator has the best possible visibility of the tool's working end. This allows for precise work close to shed walls or when loading a feeder wagon.
- Q-Fit Mounting: Most attachments for JCB telehandlers use the Q-Fit quick-hitch system. This standard allows for instant and safe tool changes without leaving the cab.
- Strength Where It's Needed: JCB uses advanced steels, like Hardox, in key wear areas (e.g., grab tines), while using lighter, formed steel structures in the body to reduce attachment weight and maximize the machine's lift capacity.
- Hydraulic Protection: Hoses and cylinders are strategically routed and guarded to minimize the risk of damage when working in tight and demanding conditions.
Part 1: Power Grabs – The Heart of Loading Operations
The Power Grab, often called a "muck fork" or "grapple," is the primary tool for loading manure, silage, and other bulk materials. The new generation of JCB grabs has been redesigned to fully utilize the potential of modern Agri machines.
Anatomy of the JCB Power Grab
- Larger Operating Range: The new design offers a wider top grab opening and greater clamping force. This allows for handling larger and bulkier loads in fewer cycles.
- Improved Geometry: The design of the grab floor and arms allows for working very close to walls, making it easy to clear out material "to the last bit."
- Heavy-Duty Pivots: Larger, galvanized pivot pins with central greasing points are used. This simplifies daily maintenance and drastically extends the life of the joints (reducing wear on pins and bushings, e.g., of CORESPEX quality).
- Spill Guard: An improved spill guard design protects the Q-Fit carriage and machine hydraulics from falling material.
Tines: Forged (KV) vs. Hardox (H) – What to Choose?
JCB offers two main tine options for its grabs, allowing the attachment to be matched to the type of work:
- Forged Tines (KV - Kverneland): These are the standard, high-strength forged tines. They are ideal for most agricultural applications, such as working with manure or silage.
- Hardox Tines (H): This is the option for the toughest jobs. Tines made from Hardox wear-resistant steel are significantly more resistant to abrasion. They are intended for work in extreme conditions, e.g., loading material mixed with stones, rubble, or for intensive scraping of hard surfaces.
Technical Specification (Example Power Grabs with Q-Fit Mount)
| Part Number | Tine Type (Bottom/Top) | Width (mm) | Capacity (m³) | Weight (kg) |
|---|---|---|---|---|
| 980/B0001 | KV / KV | 1980 | 1.5 | 545 |
| 980/B0099 | H / H | 2175 | 1.6 | 748 |
| 980/B0013 | KV / KV | 2300 | 1.7 | 581 |
| 980/B0015 | H / H | 2300 | 1.7 | 778 |
| 980/B0024 | KV / KV | 2450 | 2.4 | 660 |
| 980/B0025 | H / H | 2450 | 2.4 | 776 |
As you can see, choosing Hardox (H) tines significantly increases the attachment's weight (by up to 200 kg in the largest models), which must be considered when calculating the machine's lift capacity.
Part 2: Attachments for Manure, Silage, and Grain
Beyond the universal Power Grabs, the JCB range includes a number of highly specialized tools designed for specific farm tasks – from cutting silage from a clamp to moving grain in a warehouse. Each has a unique design to maximize efficiency in its given application.
a) Muck Forks with Top Grab
Application: A proven and extremely popular attachment, prized for its versatility. It's a "two-in-one" tool, ideal for moving manure as well as silage or bales. The strong design with bottom tines and a hydraulic top grab allows for easy penetration into packed manure and securely holds the material during transport.
Design: Similar to the Power Grabs, JCB offers a choice between forged tines (S or F type) and tines made from ultra-durable Hardox steel (H). The Hardox version (e.g., 980/B0058) is significantly heavier (600 kg vs. 470 kg for the F version) but offers the highest resistance to abrasion and bending when working on hard concrete surfaces.
b) Shear Grab (Silage Cutter)
Application: A tool designed for one, critical task: cleanly cutting silage from a clamp. A regular grab "tears" at the silage, which leads to air ingress and spoilage. A shear grab acts like a knife – the closing jaw with serrated blades precisely cuts a block of material, leaving a perfectly smooth and sealed clamp face, which minimizes feed losses.
Design: Features bottom tines (forged or Hardox) to slide under the material and a top cutting jaw with individual, serrated blades. The design is fully enclosed at the back and sides to prevent spillage of valuable material.
c) Grass / Silage Forks
Application: A maximum-volume attachment, designed specifically for the fast handling of large quantities of light but bulky grass, e.g., during silage harvesting.
Versions: JCB offers two main versions:
- High Capacity: (e.g., 980/A7707) Features a massive capacity (up to 3.6 m³), a rear spill guard, and Hardox tines. This is a tool for rapid loading.
- Folding: A brilliant solution for farmers traveling on public roads. The side sections of the fork fold hydraulically, allowing the attachment to be quickly narrowed to a safe transport width.
d) Grain Pusher
Application: A highly specialized tool for work in flat grain stores. Its main purpose is to optimize storage space by pushing grain higher than a standard bucket can. It is ideal for working over drying ducts.
Design: The construction is key. The frame (e.g., 980/A9910) is entirely tubular and made of high-strength steel. The lack of flat edges and shelves prevents grain from collecting and spilling, and the main blade has a working width of nearly 2.5 meters.
Part 3: Bale Handling Attachments
Handling straw and silage bales is one of the most common tasks for telehandlers and backhoes in agriculture. This requires attachments that are not only fast but, above all, safe for the load and the machine. JCB offers a full range of specialized tools for this.
a) Bale Spikes (Single and Twin)
Application: The simplest and fastest tool for transporting unwrapped bales (straw, hay).
- Single Bale Spike (e.g., 980/25200): Designed for efficient handling of round bales up to 1.8m in diameter. A lower tine stabilizes the bale and prevents it from rotating during transport.
- Twin Bale Spike (e.g., 980/36200): Allows for the safe transport of two round bales at once or single large rectangular bales. This tool significantly increases work efficiency during loading and unloading.
b) Bale Grab ("Clap Hands")
Application: Much more versatile than a spike. Two hydraulically controlled, curved arms ("claws") allow for securely gripping bales without damaging them. Importantly, the lack of sharp edges makes this attachment suitable for both wrapped (silage) and unwrapped bales.
Key Features: The JCB design (e.g., 980/A7957) includes a built-in check valve, which ensures the grip is maintained even if the machine's hydraulics fail. Additionally, the operator can lock one of the arms, which greatly simplifies the precise stacking of bales.
c) Wrapped Bale Handler
Application: A tool designed specifically for the delicate handling of plastic-wrapped silage bales. Its smooth, tubular construction minimizes the risk of puncturing or tearing the film, which is crucial for preserving feed quality.
Key Features: The JCB model (e.g., 980/A8080) is a 2-in-1 design. It features removable sleeves over the tines. With the sleeves on, it acts as a safe grab for wrapped bales. With them removed, it exposes the spikes, turning it into a standard bale spike.
Key Principles of Agri Attachment Selection and Operation
Rule #1: Understand Your Mounting System
Two systems dominate JCB Agri machines: Q-Fit (standard on Agri telehandlers) and Pin & Cone (standard on wheel loaders). The attachment must be compatible. Many attachments, like the Shear Grab, are offered with a "Universal" mount, which requires a specific adapter plate (e.g., Q-Fit) to be welded or bolted on.
Rule #2: Maintain Your Pivot Points
Attachments like grabs, shear grabs, and fork positioners have many pivot points. These points work under heavy load and are exposed to constant contact with dirt and moisture. Daily greasing of these points is fundamental. Neglecting lubrication leads to wear in the pins and bushings (even the best ones, like CORESPEX), causing play and loss of precision.
FAQ - Frequently Asked Questions
1. What is the difference between forged tines (KV) and Hardox (H) tines on grabs?
Forged (KV) tines are the industrial standard with high strength, ideal for organic materials (manure, silage). Hardox (H) tines are made from wear-resistant steel and are intended for extreme conditions, e.g., working on a concrete manure pad or handling material mixed with stones.
2. Can I use the "Clap Hands" bale grab to move unwrapped straw bales?
Yes. Its smooth, tubular design is safe for plastic wrap, but it grips standard straw or hay bales just as effectively and safely, without damaging them the way spikes do.
3. Why is a Shear Grab better than a regular grab for silage?
Because the Shear Grab "cuts" the material, leaving a smooth clamp face. A regular grab "tears" the silage, aerating it and starting the spoilage process. The shear grab drastically reduces feed losses.
4. My grab's hydraulic cylinders are "sweating" oil. Is this a problem?
Yes. This indicates that the piston or rod seals (e.g., VICORTEX seals) are worn. This can lead to a loss of gripping force and cause the jaws to open on their own. The seals should be replaced.
Versatility Starts with the Right Attachment.
Genuine JCB attachments are a guarantee of perfect fit and performance. However, if you are looking for solid, proven alternatives at a competitive price, check out our range of HIMACORE agricultural attachments. We offer durable grabs, forks, and buckets that can handle hard farm work. Remember, hydraulic attachments require clean oil – protect your machine with REDX filters. Contact us, and we will help you choose the tools that will boost your productivity!
Related posts
WE OFFER PRODUCTS OF THE BEST BRANDS


















ul. Podkarpacka 57A, 35-082 Rzeszów
NIP: 813-352-97-49 REGON: 180286726
Opening hours
Telephone support - Monday - Friday (8:00 AM – 5:00 PM)
Order pick-up - Monday - Friday (8:00 AM – 4:30 PM)
[email protected]
[email protected]
Gadu-Gadu communicator
GG: 4185846 - Daniel
+48 17 864 31 00
+48 17 864 00 24
+48 17 864 25 96
Mobile phone
+48 607-700-547
+48 695-944-818
+48 691-330-531
+48 690-906-751
Fax
+48 17 864 31 20
